How to Connect AirPods to iPad- Full Guide

As an Amazon Associate we earn from qualifying purchases.

How to Connect AirPods to iPad

While operating an iPad, nothing can beat the satisfaction of using AirPods for the auditory device to work with it. You might have different generation AirPods, but no matter what model you have, you should know how to connect AirPods to iPad correctly to get the best experience.

Pairing your AirPods to your iPad is not very complicated. However, you may still face challenges to do it appropriately if you are not used to it.

In this guide, you will find out exactly how to link AirPods to iPad quickly and correctly.

So, without further ado, let’s dive deep into the details.

Requirements for a secured connection of AirPods to iPad

Before you start the pairing process, you must fulfill the requirements for a secured connection of your AirPods to the iPad. They include –

  • Having the AirPods and the AirPods case fully or sufficiently charged
  • Having your iPad charged
  • Your iPad has the latest iPadOS version installed
  • The Bluetooth is turned on
  • Having the AirPods placed near the iPad

Once you fulfill these criteria, hopefully, you won’t face any problems connecting AirPods to your iPad.

How to connect AirPods to iPad – Detailed steps

You can follow two methods to connect AirPods to iPad and both methods use Bluetooth connectivity for the pairing.

Perform the simple steps below to do it.

Connect AirPods to iPad automatically.

An automatic connection means you can use the Control Center of your iPad to access the connection. The Control Center on your iPad will be available by swiping down the screen from the top right corner.

Step 1 – Unlock your iPad and tap the “Bluetooth” icon to turn it on

Connect AirPods to iPad automatically 1

Turn on and unlock your iPad first and access the Control Center by swiping down the top right corner of the screen. Then, tap on the Bluetooth icon to turn it on.

Step 2 – Put AirPods in their case and turn on the cases’ power button

Take your AirPods case and put the AirPods in it if they are not there. Next, open the lid of the case. Turn the case around, and you will see a round button on the back.

Press the button and hold for some seconds, then you will see the case lights flickering an amber light, which means they are active now and are in the pairing mode.

Step 3 – Connect through the pop-up graphics

Connect AirPods to iPad automatically 1

After that, you will see a pop-up message showing your AirPods image and exposing an option called “Connect” on your iPad screen. Simply tap on Connect, and your AirPods will automatically pair to your iPad now.

Connect AirPods to iPad Manually

Connect AirPods to iPad Manually

The manual connection is similar to the automatic connection. However, there are subtle changes in the steps.

Step 1 – Go to “Settings” to turn on “Bluetooth”

Unlock your iPad and go to the “Settings” option. Then opt for “Bluetooth” and turn it on by tapping the toggle beside the option.

Step 2 – Power on the AirPods with the case

Power on your AirPods and the case following the exact same steps as mentioned in the automatic connection.

Step 3 – Manually select your AirPods showing in the available devices on your iPad screen

Now, you will see your AirPods name on the screen underneath the “Bluetooth” section. Tap on your AirPods’ name, and you are done connecting them.

How to troubleshoot AirPods not connecting to iPad

You might face some issues while pairing AirPods to iPad. Most of them occur if you don’t fulfill the requirements we talked about in the first place. So, ensure you complete the requirements first.

Apart from that, you can apply some other troubleshooting methods to eradicate the sustaining problem.

Software update

To connect AirPods to your iPad successfully, you need to update the relevant Operating System of your iPad.

Here are some examples of the minimum operating system requirements for your iPad:

  • For AirPods 1st Generation, you need to have an iPad with iPadOS 10 or later
  • For AirPods 2nd Generation, you need to have an iPad with iPadOS 12.2 or later
  • For AirPods 3rd Generation, you need to have an iPad with iPadOS 15.1 or later.
  • For AirPods Pro, you need to have an iPad with iPadOS 13.2 or later.

If your iPad’s OS is not updated, you can quickly do it by following the straightforward steps below.

  1. Go to “Settings”> “General”> “Software Update”
  2. Then tap on “Download and Install.”
  3. Enter your Passcode and proceed through other prompts that may appear
  4. Agree to the Apple’s Terms and Conditions

While updating your iPad’s software, ensure you have a secure internet connection. Besides, back up all your data before starting the procedure for safety.

Audio output device setting

If you can’t hear through your AirPods, they are probably not set as your audio output device or have any firmware issues.

To solve the problem, scroll down the Control Center and tap the AirPlay icon. Access the option and opt for a firmware update or make necessary changes.

Final Words

Hopefully, reading this far has given you a better understanding of how to connect AirPods to iPad effectively. You have to just follow the steps above to perform the task, and you are ready.

While linking your devices, if you face any issues, follow the troubleshooting methods. Hope that it will solve all the issues within minutes.

Stay connected with us for more guides like this, and comment below to let us know how this guide helped you.

Abid is a tech enthusiastic and iPhone app reviewer. Currently, he is working as an editor of XlightMedia. He reviews different iPhone apps based on different categories including utility, photography, music, and so on.