How to Connect Jabra Earbuds to iPhone| A Complete Guide

As an Amazon Associate we earn from qualifying purchases.

How to Connect Jabra Earbuds to iPhone

Jabra manufactures advanced earbuds that deliver premium sound quality. Besides, they are designed to be compatible with various devices, including iPhones. So, if you’ve purchased a pair of Jabra earbuds, you can easily connect them to your iPhone and enjoy a seamless audio experience. 

It’s pretty normal to wonder how to connect Jabra earbuds to iPhone if you’re a new user. All you need is to go through a few simple settings. 

Don’t worry if you don’t know how to pair Jabra earbuds. We’ll assist you in learning the entire process trouble-free. Also, you’ll know the potential reasons if your Jabra earbud interrupts the connection with your iPhone. Check out the detail!

How to Connect Jabra Earbuds to iPhone: Step-by-Step Guide

Connecting Jabra earbuds to iPhone is as easy as connecting it to an Android phone. Following only two fundamental steps, you can easily connect your earbud to the iPhone. Here’s how-

Step-1: Put Your Jabra Earbuds in The Pairing Mode

You cannot go for the Jabra earbuds pairing to your iPhone unless the pairing mode is active. So, this is how to put Jabra in pairing mode-

Step-1 Put Your Jabra Earbuds in The Pairing Mode
  • For the Jabra earbuds that come with a multifunctional button, you need to press and hold that button for up to 5 seconds. Or until the Bluetooth LED light starts blinking. This means the earbuds are in pairing mode.
  • For some Jabra models, such as the Jabra Elite 65t, you need to press and hold the button on the right earcup until the LED light starts flashing. And other models, such as Jabra Elite 4, you need to press and hold both the left and right buttons.

Step-2: Pair Jabra Earbuds with Your iPhone Via Bluetooth 

Once you’re done activating the pairing mode of your earbud, move forward to Jabra Bluetooth pairing with your iPhone-

Step-2 Pair Jabra Earbuds with Your iPhone Via Bluetooth 01
  1. Go to Settings on your iPhone and select Bluetooth.
  2. Then turn on Bluetooth if you haven’t already. After that, your iPhone’s Bluetooth will search for nearby Bluetooth-enabled devices.
  3. By this point, your Jabra earbuds should be in the pairing mode as described in the process in the previous section.
  4. Wait for your earbuds’ name to appear on your iPhone’s screen. Once it appears, tap on it.
  5. You might have to enter a PIN code. Usually, it is “0000” by default.
  6. Your Jabra earbuds and iPhone are now successfully paired.

NB: Jabra manufactures different models of earbuds like Jabra Elite 65t. So, the pairing system may vary from models to medals. But the method we have shared is the most common one. It may work through every model considering a few setting changes.  

Why Are My Jabra Earbuds Not Pairing with My

iPhone? 5 Top Reasons

If it’s your first time pairing a Jabra earbud to an iPhone, you might experience a connection problem. However, every earbud gets connection problems, and Jabra earbuds have no difference. 

And here’s why the connection problem happens-

1.  Inactive Bluetooth Pairing

The primary task is to enable Bluetooth pairing mode on your Jabra earbuds. A maximum of the users forget to enable the Bluetooth option, or they don’t know the proper way to put the earbuds in pairing mode. It happens especially with the newcomers. 


  • Make sure that you’ve turned ON Bluetooth on you iPhone.
  • Turn off and turn on the Bluetooth on your iPhone.
  • Turn on and off your earbuds.
  • Place the earbuds in the charging case for a minute or two before trying to pair them again.

2.  Low Battery/ Old Battery

One of the most common reasons is low battery. You cannot expect to get a smooth connection while your battery is running out. Also, if the battery is too old and incapable of running for a long time, either the device won’t connect or the connection will drop out frequently.


  • Check out whether the battery is fully charged 
  • Ensure the battery is well performed. If possible, replace a new one.

3.  Long Distance

You must consider the distance while pairing your device with your earbud. It won’t get connected unless the distance is within 10 meters.


  • Try placing your iPhone near your hands
  • Don’t make the distance more than 10 meters
  • Try minimizing the distance to 2, 3 meters, or even closer if possible
  • Avoid any obstacles between your earbuds and the iPhone

4.  Clogged Earbud 

Debris is a great concern in terms of poor connection or connection dropout. Consistent usage attracts dust inside the earbud. Thus, the charging connectors (Charging connector is what enable the connectivity with other devices like iPhone) of the earbud get blocked and prevents pairing afterward. 


  • Clean the earbud after a certain period of use
  • Clean the charging case as well

5. The Previously Connected Device is Active

Although the Jabra earbud is featured to connect with several devices simultaneously, we recommend avoiding this practice. Pairing two devices at the same time will surely cause a connection error. 


  • Don’t connect two devices at a time
  • Remove the history of previously connected devices. To remove the history in your iPhone-
  • Go to Settings > Bluetooth.
  • Now go to the Bluetooth List
  • You’ll have to select your device and then click on the Forget Device option
  • This setting will no longer cause any connection problem


Learning how to connect Jabra earbuds to iPhone will save you time and give you a hassle-free pairing experience. Additionally, we’ve shared additional information, such as reasons for connection dropouts. Anyone can face connection issues at any time, so it is important to know the reasons for the connectivity problems.

Abid is a tech enthusiastic and iPhone app reviewer. Currently, he is working as an editor of XlightMedia. He reviews different iPhone apps based on different categories including utility, photography, music, and so on.