As we’re being wrapped up with technology today, we seek more convenience in them. Bluetooth headphones or wireless headphones are such examples. Since they came in, they have become increasingly popular due to their ease of use and freedom from tangled wires.
Connecting our favorite Bluetooth Headphones to your phone and enjoying music, calls, and movies has become our priority. One popular brand of Bluetooth headphones is Skullcandy. And if you have one, it would not be unfair to say that you’d want to know how to connect Skullcandy Bluetooth headphones to iPhone.
This blog will guide you through the process and tell you what to do if any issue occurs while pairing. So, without further ado, let’s dive deep into the step-by-step guide.
How to Connect Skullcandy Bluetooth Headphones to iPhone – Step-By-Step Guide
Connecting Skullcandy headphones to your iPhone is straightforward, like connecting any other Bluetooth device. However, the process sometimes becomes difficult when there are pairing issues.
Let’s learn how to connect it first and then explore the pairing issues and specific solutions to it.
Step 1 – Things You Need to Check
You need to check the following things before you pair Skullcandy headphones with your iPhone.
Both devices are turned on
You must ensure both your devices are turned on. That means your iPhone and Skullcandy Bluetooth headphones must be switched on.
Bluetooth functionality in both devices
Make sure that the Bluetooth feature of both your headphone and the iPhone works properly. You have to turn on the Bluetooth for both devices in the following steps.
Sufficient Battery Running In Both Devices
Ensure both of your devices are charged enough so that no interruption occurs in the pairing process. Also, keep in mind that if you have critically low battery life on your headphone then it would not pair with your iPhone. Additionally, when you are charging your headphones it won’t pair during that time.
The Devices Are Kept Close
Keep the devices close to each other for sending and receiving stronger connections. Your iPhone’s maximum Bluetooth range is around 30 ft and that too unobstructed range. So, the actual range between your headphone and iPhone should be way less than that. Also, try to avoid any obstacles in between that might cause signal interruptions.
Step 2 – Put the Skullcandy Headphones in the Pairing Mode
First, you’ve to turn on your Skullcandy headphones. You can do this with the Power ON/OFF button placed on the headphones. Press that button and hold them for a while. Normally, the power button for most Skullcandy and other headphones models is also its Bluetooth pairing button.
So, the action of pressing and holding the power button for 4 to 5 seconds will put the Skullcandy Bluetooth headphones in the pairing mode. This will also be visually indicated by the flashing LED light.
Step 3 – Connecting Skullcandy Bluetooth Headphones with an iPhone
Now for the final part of the pairing process, head over to the “Settings” app on your iPhone. Then tap on “Bluetooth” and turn it on if it isn’t already. After that, look for your Skullcandy headphones’ name to appear on the list of available Devices section. Then tap on the name of your headphone to pair, and you are done.
After the use and turning off of the headphones, the next time when you want to connect them to the devices, just turn on the Bluetooth on your iPhone and the Skullcandy Bluetooth headphones. They’ll both automatically connect with each other without going to this hassle again.
Why Are My Skullcandy Headphones Not Pairing With iPhone?
It is obvious that by following the simple steps mentioned above, you can pair Skullcandy Bluetooth headphones with your iPhone. However, in some cases, you may find trouble pairing.
Below are the most common possible reasons your Skullcandy headphones aren’t pairing with your iPhone.
Headphones are out of range
Bluetooth connection for electronic devices requires an uninterrupted field to connect with each other accurately. Your iPhone can detect any device’ within 30ft of unobstructed range. If your Skullcandy Bluetooth headphones are away from your iPhone, they may struggle to pair. Also, if there is a significant obstacle between your iPhone or headphone then it will also cause issues in pairing. Therefore, the best course of action would be to move your headphones closer to your iPhone while making sure nothing is blocking the Bluetooth signal.
Headphones are already connected to another device
Suppose you’ve previously connected your headphones to another device. So, now when you try to pair them with your iPhone, you are unable to pair them.
In that case, you may need to disconnect the headphones from the other device before attempting to pair them with your iPhone.
Low battery life on headphones or iPhone
Low battery, either on your iPhone or in your Bluetooth headphones, can cause disruption in connectivity. If your iPhone or the Skullcandy has critically low battery life then they can fail to connect with each other.
Bluetooth activation option issue in the device
You must have been through this once, at least. When you’re trying to turn on the Bluetooth settings and looking for available devices, no matter how many times you try, it’s just not turning on or, if it turns on, not showing the available devices.
Well, this is a very common issue in every other mobile device. You can face this in your iPhone, too, which can cause your Bluetooth headphones not to pair with your iPhone.
Too many devices paired with headphones
Another reason your headphones fail to pair with your iPhone could be that they are already paired with too many other devices. Many headphones have a limit on how many active pairings they can support at any given time. So, if that limit is reached, then it might not pair with your iPhone. In that case, you might need to reset your headphone or unpair your headphone from some of the other devices.
Unknown bug in the device or Bluetooth headphones
There are reasons which can be found, and there are ones you can’t get a clue of. When you find the reason causing the problem, there is a way to troubleshoot it. But, in some cases, Bluetooth connections between devices act weirdly because of some unknown bug, and you can’t find the reason. So, you can’t solve the issue as well.
In such cases, you must show your phone to someone professional who can fix these technical things.
Troubleshooting Tips for Skullcandy Headphones Pairing Issues
Here are some ways to troubleshoot pairing Skullcandy headphones issues on your own.
Keep Your Devices Charged
Before connecting Skullcandy headphones to iPhone or any other device, keep the devices charged. If keeping fully charged isn’t possible, try to have at least 40% charge on your device and 50% charge on your headphones.
Keep the devices closed to each other while connecting
When pairing them for the first time, keep them side by side too closely so that they get to build a quick, strong Bluetooth connection. However, to connect the devices next time, do the same thing for a better connection.
Make sure there are no other electrical interference in between
Electrical interference can cause Bluetooth connections not to be securely connected. If you’re having trouble connecting your Bluetooth headphones to your device, move to a place with the devices where there are no other electrical components.
Then try to reconnect the headphones to your device.
Ensure that your Bluetooth headphones is disconnected from other devices
If there is an active pairing of your Skullcandy headphones to another device, you need to disconnect it. You must head over to that device’s Settings > Bluetooth and disconnect or turn off Bluetooth. This will disconnect your Skullcandy headphones from that device. After this, try connecting the headphone to your iPhone.
Restart your iPhone and Bluetooth Headphones, then Reconnect
Applying any of the measures above should solve your Bluetooth headphone connection problem. If the problem still remains, this is the last thing you can do.
Turn off both your iPhone and Skullcandy Bluetooth headphones. Then turn them on and try to reconnect after a while. Before connecting, go to the Bluetooth setting in your device and forget the headphone’s name.
Take a break for a minute, and then pair your Skullcandy Bluetooth Headphones with your iPhone again.
Conclusion
As you’ve come this far, hope that you found this guide helpful and practical. Follow this guide on how to connect Skullcandy Bluetooth Headphones to iPhone and enjoy using the tech bomb.
If you’re having any trouble connecting Skullcandy headphones to your device, apply the troubleshooting methods mentioned above. Let us know in the comments which one of them solved the issue for you.
